ok my first post didn't elicit any respnce let try again with a different question.
Carb: Solex 34 pict 3.
The air correction jet, mine has an emulsifier tube, the whole jet is about 1 1/4 inches long.
Just about ALL the air jets i have seen advertis are short with no emulsifier tube.
Can the short ones be used in place of the long ones.
Also where can i find the jet diameter holes sizes, the main jets are mm sizes ie 130 is 1.3 mm. What is the pilot jet size in mm.
The jet size i have is 55, is that 0.55mm, thats just over 20 thou.
Carb: Solex 34 pict 3.
The air correction jet, mine has an emulsifier tube, the whole jet is about 1 1/4 inches long.
Just about ALL the air jets i have seen advertis are short with no emulsifier tube.
Can the short ones be used in place of the long ones.
Also where can i find the jet diameter holes sizes, the main jets are mm sizes ie 130 is 1.3 mm. What is the pilot jet size in mm.
The jet size i have is 55, is that 0.55mm, thats just over 20 thou.